Digital supply chain security refers to efforts to enhance cyber security within the supply chain. It is a subset of supply chain security and is focused on the management of cyber security requirements for information technology systems, software and networks, which are driven by threats such as cyber-terrorism, malware, data theft and the advanced persistent threat (APT). Typical supply chain cyber security activities for minimizing risks include buying only from trusted vendors, disconnecting critical machines from outside networks, and educating users on the threats and protective measures they can take. The acting deputy undersecretary for the National Protection and Programs Directorate for the United States Department of Homeland Security, Greg Schaffer, stated at a hearing that he is aware that there are instances where malware has been found on imported electronic and computer devices sold within the United States. == Examples of supply chain cyber security threats == Network or computer hardware that is delivered with malware installed on it already. Malware that is inserted into software or hardware (by various means) Vulnerabilities in software applications and networks within the supply chain that are discovered by malicious hackers Counterfeit computer hardware == Related U.S. government efforts == Comprehensive National Cyber Initiative Defense Procurement Regulations: Noted in section 806 of the National Defense Authorization Act International Strategy for Cyberspace: White House lays out for the first time the U.S.’s vision for a secure and open Internet. The strategy outlines three main themes: diplomacy, development and defense. Diplomacy: The strategy sets out to “promote an open, interoperable, secure and reliable information and communication infrastructure” by establishing norms of acceptable state behavior built through consensus among nations. Development: Through this strategy the government seeks to “facilitate cybersecurity capacity-building abroad, bilaterally and through multilateral organizations.” The objective is to protect the global IT infrastructure and to build closer international partnerships to sustain open and secure networks. Defense: The strategy calls out that the government “will ensure that the risks associated with attacking or exploiting our networks vastly outweigh the potential benefits” and calls for all nations to investigate, apprehend and prosecute criminals and non-state actors who intrude and disrupt network systems. == Related government efforts around the world == Common Criteria offers with Evaluation Assurance Level(EAL) 4 an opportunity to evaluate all relevant aspects of the digital supply chain security like the product, the development environment, IT systems security, the processes in human resource, physical security and with the module ALC_FLR.3 (Systematic Flaw Remediation) also security update processes and methods even by physical site visits. EAL 4 is mutually recognized in countries that signed the SOGIS-MRA and up to ELA 2 in countries the signed the CCRA but including ALC_FRL.3. Russia: Russia has had non-disclosed functionality certification requirements for several years and has recently initiated the National Software Platform effort based on open-source software. This reflects the apparent desire for national autonomy, reducing dependence on foreign suppliers. India: Recognition of supply chain risk in its draft National Cybersecurity Strategy. Rather than targeting specific products for exclusion, it is considering Indigenous Innovation policies, giving preferences to domestic ITC suppliers in order to create a robust, globally competitive national presence in the sector. China: Deriving from goals in the 11th Five Year Plan (2006–2010), China introduced and pursued a mix of security-focused and aggressive Indigenous Innovation policies. China is requiring an indigenous innovation product catalog be used for its government procurement and implementing a Multi-level Protection Scheme (MLPS) which requires (among other things) product developers and manufacturers to be Chinese citizens or legal persons, and product core technology and key components must have independent Chinese or indigenous intellectual property rights. == Private sector efforts == SLSA (Supply-chain Levels for Software Artifacts) is an end-to-end framework for ensuring the integrity of software artifacts throughout the software supply chain. The requirements are inspired by Google’s internal "Binary Authorization for Borg" that has been in use for the past 8+ years and that is mandatory for all of Google's production workloads. The goal of SLSA is to improve the state of the industry, particularly open source, to defend against the most pressing integrity threats. With SLSA, consumers can make informed choices about the security posture of the software they consume. == Other references == Financial Sector Information Sharing and Analysis Center International Strategy for Cyberspace (from the White House) NSTIC SafeCode Whitepaper Archived 2013-10-21 at the Wayback Machine Trusted Technology Forum and the Open Trusted Technology Provider Standard (O-TTPS) Archived 2012-01-03 at the Wayback Machine Cyber Supply Chain Security Solution Malware Implants in Firmware Supply Chain in the Software Era INFORMATION AND COMMUNICATIONS TECHNOLOGY SUPPLY CHAIN RISK MANAGEMENT TASK FORCE: INTERIM REPORT
Twproject
Twproject (say: T W Project) is a web-based project and groupware management tool created by Open Lab, an Italian software house founded in 2001. It won the 17th Jolt Productivity Award in 2007 in the project management category. In March 2019 it becomes property of Twproject company. It has widespread use in universities as a teaching tool in project management courses. It is used by Oracle Corporation, Prada, Calzedonia, General Electric and many other companies from corporations to small start-ups. == History == April 2001 - The idea of Teamwork came to Open-Lab founders from a need to overcome the PM tools used at that time. It was built in Microsoft ASP and Adobe Flash November 2002 - Open-Lab decide to move from Flash to HTML and from ASP to Java-JSP. Teamwork 2 development is started. June 2004 - Teamwork 2 released, using top open-source technologies like Hibernate, jBlooming, dynamic CSS, Ajax 7 January 2005 - Teamwork goes open source, under LGPL license; remains such until June 2006 (18 months): it is a hit application on SourceForge, with 38.000 downloads, covered by greeting but starving April 2005 - Open-Lab takes the decision to change commercial strategy to finance development of Teamwork version 3 6 June 2006 - Teamwork 3 is finally out (15 months development). New interface, many new features, agile support and much more 27 March 2007 - Teamwork wins the 2007 JOLT Productivity Awards for project management category July 2007 - Teamwork 4 development started: new interface, extended use of new HTML capabilities, JS-oriented interface, start using jQuery February 2009 - Teamwork 4.0 is out February 2010 - Teamwork 4.4: public project pages, Chinese interface. jQuery is getting more space in Teamwork December 2010 - Teamwork 4.6: released Mobile module available for iPhone, Android, BlackBerry. Intensive usage of jQuery June 2011 - Teamwork 4.7: released Issue Kanban / Organizer January 2012 - Teamwork 5.0 development started. Lighter interface, extensive usage of dynamic pages, easier installer and first time approach. Learning curve highly reduced. A jQuery Gantt editor included and released free for the community July 2012 - Teamwork 5 released and also the free online Gantt editor November 2012 - Teamwork 5.1 with new trees and improved model for staffing March 2013 - Teamwork 5.2 with stronger support for customizations and Japanese interface. April 2014 - Teamwork has changed its name in Twproject because the domain teamwork.com has been purchased by Teamwork. April 2013 - Twproject 5.4 with a redesigned more powerful Gantt chart. August 2015 - Twproject 5 finale release. September 2015 - Twproject 6 with a completely redesigned user interface. March 2019 - A new company Twproject srl has been spun off. September 2021 - Twproject 7 has been released introducing WBS based management and workload management. == Features == Project & task management (with Microsoft Project import/export), and JSON format Gantt editor. Uses jQuery Gantt components Time tracking. Several entry points: dashboard, weekly view, issues, start/stop buttons Resource planning with weekly/monthly view, work load overview, unavailability from agenda Issue tracking & planning(with Kanban), e-mail integration, task dedicated inboxes Dashboard configuration, with customizable portlets and layout Message boards Scrum module Meeting and minute management, attached documents Agenda (Integrates with iCal, Microsoft Outlook, Microsoft Entourage, and Google Calendar) Document management, remote file systems link with NTFS, FTP, SVN, S3 (Dropbox, Google drive) Mobile application for iPhone, iPad, Android, Blackberry, Windows phone == Integration == A complete JSON API is available for integrations. The applications runs in Java JDK 8+ on the Hibernate object/relational mapping. The standard distribution uses Apache Tomcat 9, but can run on any J2EE application server. Twproject is tested on these DB servers: MySQL, Oracle, SQL Server, PostgreSql, HSQLDB, but as uses Hibernate can run on many others. There is simple graphical step-by-step installer for Windows, Mac, Linux, .zip/.tar.gz/.rpm packages.
Version space learning
Version space learning is a logical approach to machine learning, specifically binary classification. Version space learning algorithms search a predefined space of hypotheses, viewed as a set of logical sentences. Formally, the hypothesis space is a disjunction H 1 ∨ H 2 ∨ . . . ∨ H n {\displaystyle H_{1}\lor H_{2}\lor ...\lor H_{n}} (i.e., one or more of hypotheses 1 through n are true). A version space learning algorithm is presented with examples, which it will use to restrict its hypothesis space; for each example x, the hypotheses that are inconsistent with x are removed from the space. This iterative refining of the hypothesis space is called the candidate elimination algorithm, the hypothesis space maintained inside the algorithm, its version space. == The version space algorithm == In settings where there is a generality-ordering on hypotheses, it is possible to represent the version space by two sets of hypotheses: (1) the most specific consistent hypotheses, and (2) the most general consistent hypotheses, where "consistent" indicates agreement with observed data. The most specific hypotheses (i.e., the specific boundary SB) cover the observed positive training examples, and as little of the remaining feature space as possible. These hypotheses, if reduced any further, exclude a positive training example, and hence become inconsistent. These minimal hypotheses essentially constitute a (pessimistic) claim that the true concept is defined just by the positive data already observed: Thus, if a novel (never-before-seen) data point is observed, it should be assumed to be negative. (I.e., if data has not previously been ruled in, then it's ruled out.) The most general hypotheses (i.e., the general boundary GB) cover the observed positive training examples, but also cover as much of the remaining feature space without including any negative training examples. These, if enlarged any further, include a negative training example, and hence become inconsistent. These maximal hypotheses essentially constitute a (optimistic) claim that the true concept is defined just by the negative data already observed: Thus, if a novel (never-before-seen) data point is observed, it should be assumed to be positive. (I.e., if data has not previously been ruled out, then it's ruled in.) Thus, during learning, the version space (which itself is a set – possibly infinite – containing all consistent hypotheses) can be represented by just its lower and upper bounds (maximally general and maximally specific hypothesis sets), and learning operations can be performed just on these representative sets. After learning, classification can be performed on unseen examples by testing the hypothesis learned by the algorithm. If the example is consistent with multiple hypotheses, a majority vote rule can be applied. == Historical background == The notion of version spaces was introduced by Mitchell in the early 1980s as a framework for understanding the basic problem of supervised learning within the context of solution search. Although the basic "candidate elimination" search method that accompanies the version space framework is not a popular learning algorithm, there are some practical implementations that have been developed (e.g., Sverdlik & Reynolds 1992, Hong & Tsang 1997, Dubois & Quafafou 2002). A major drawback of version space learning is its inability to deal with noise: any pair of inconsistent examples can cause the version space to collapse, i.e., become empty, so that classification becomes impossible. One solution of this problem is proposed by Dubois and Quafafou that proposed the Rough Version Space, where rough sets based approximations are used to learn certain and possible hypothesis in the presence of inconsistent data.
Lexical substitution
Lexical substitution is the task of identifying a substitute for a word in the context of a clause. For instance, given the following text: "After the match, replace any remaining fluid deficit to prevent chronic dehydration throughout the tournament", a substitute of game might be given. Lexical substitution is strictly related to word sense disambiguation (WSD), in that both aim to determine the meaning of a word. However, while WSD consists of automatically assigning the appropriate sense from a fixed sense inventory, lexical substitution does not impose any constraint on which substitute to choose as the best representative for the word in context. By not prescribing the inventory, lexical substitution overcomes the issue of the granularity of sense distinctions and provides a level playing field for automatic systems that automatically acquire word senses (a task referred to as Word Sense Induction). == Evaluation == In order to evaluate automatic systems on lexical substitution, a task was organized at the Semeval-2007 evaluation competition held in Prague in 2007. A Semeval-2010 task on cross-lingual lexical substitution has also taken place. == Skip-gram model == The skip-gram model takes words with similar meanings into a vector space (collection of objects that can be added together and multiplied by numbers) that are found close to each other in N-dimensions (list of items). A variety of neural networks (computer system modeled after a human brain) are formed together as a result of the vectors and networks that are related together. This all occurs in the dimensions of the vocabulary that has been generated in a network. The model has been used in lexical substitution automation and prediction algorithms. One such algorithm developed by Oren Melamud, Omer Levy, and Ido Dagan uses the skip-gram model to find a vector for each word and its synonyms. Then, it calculates the cosine distance between vectors to determine which words will be the best substitutes. === Example === In a sentence like "The dog walked at a quick pace" each word has a specific vector in relation to the other. The vector for "The" would be [1,0,0,0,0,0,0] because the 1 is the word vocabulary and the 0s are the words surrounding that vocabulary, which create a vector.
Sayre's paradox
Sayre's paradox is a dilemma encountered in the design of automated handwriting recognition systems. A standard statement of the paradox is that a cursively written word cannot be recognized without being segmented and cannot be segmented without being recognized. The paradox was first articulated in a 1973 publication by Kenneth M. Sayre, after whom it was named. == Nature of the problem == It is relatively easy to design automated systems capable of recognizing words inscribed in a printed format. Such words are segmented into letters by the very act of writing them on the page. Given templates matching typical letter shapes in a given language, individual letters can be identified with a high degree of probability. In cases of ambiguity, probable letter sequences can be compared with a selection of properly spelled words in that language (called a lexicon). If necessary, syntactic features of the language can be applied to render a generally accurate identification of the words in question. Printed-character recognition systems of this sort are commonly used in processing standardized government forms, in sorting mail by zip code, and so forth. In cursive writing, however, letters comprising a given word typically flow sequentially without gaps between them. Unlike a sequence of printed letters, cursively connected letters are not segmented in advance. Here is where Sayre's Paradox comes into play. Unless the word is already segmented into letters, template-matching techniques like those described above cannot be applied. That is, segmentation is a prerequisite for word recognition. But there are no reliable techniques for segmenting a word into letters unless the word itself has been identified. Word recognition requires letter segmentation, and letter segmentation requires word recognition. There is no way a cursive writing recognition system employing standard template-matching techniques can do both simultaneously. Advantages to be gained by use of automated cursive writing recognition systems include routing mail with handwritten addresses, reading handwritten bank checks, and automated digitalization of hand-written documents. These are practical incentives for finding ways of circumventing Sayre's Paradox. == Avoiding the paradox == One way of ameliorating the adverse effects of the paradox is to normalize the word inscriptions to be recognized. Normalization amounts to eliminating idiosyncrasies in the penmanship of the writer, such as unusual slope of the letters and unusual slant of the cursive line. This procedure can increase the probability of a correct match with a letter template, resulting in an incremental improvement in the success rate of the system. Since improvement of this sort still depends on accurate segmentation, however, it remains subject to the limitations of Sayre's Paradox. Researchers have come to realize that the only way to circumvent the paradox is by use of procedures that do not rely on accurate segmentation. == Directions of current research == Segmentation is accurate to the extent that it matches distinctions among letters in the actual inscriptions presented to the system for recognition (the input data). This is sometimes referred to as “explicit segmentation”. “Implicit segmentation,” by contrast, is division of the cursive line into more parts than the number of actual letters in the cursive line itself. Processing these “implicit parts” to achieve eventual word identification requires specific statistical procedures involving hidden Markov models (HMM). A Markov model is a statistical representation of a random process, which is to say a process in which future states are independent of states occurring before the present. In such a process, a given state is dependent only on the conditional probability of its following the state immediately before it. An example is a series of outcomes from successive casts of a die. An HMM is a Markov model, individual states of which are not fully known. Conditional probabilities between states are still determinate, but the identities of individual states are not fully disclosed. Recognition proceeds by matching HMMs of words to be recognized with previously prepared HMMs of words in the lexicon. The best match in a given case is taken to indicate the identity of the handwritten word in question. As with systems based on explicit segmentation, automated recognition systems based on implicit segmentation are judged more or less successful according to the percentage of correct identifications they accomplish. Instead of explicit segmentation techniques, most automated handwriting recognition systems today employ implicit segmentation in conjunction with HMM-based matching procedures. The constraints epitomized by Sayre's Paradox are largely responsible for this shift in approach.
Inpainting
Inpainting is a conservation process where damaged, deteriorated, or missing parts of an artwork are filled in to present a complete image. This process is commonly used in image restoration. It can be applied to both physical and digital art mediums such as oil or acrylic paintings, chemical photographic prints, sculptures, or digital images and video. With its roots in physical artwork, such as painting and sculpture, traditional inpainting is performed by a trained art conservator who has carefully studied the artwork to determine the mediums and techniques used in the piece, potential risks of treatments, and ethical appropriateness of treatment. == History == The modern use of inpainting can be traced back to Pietro Edwards (1744–1821), Director of the Restoration of the Public Pictures in Venice, Italy. Using a scientific approach, Edwards focused his restoration efforts on the intentions of the artist. It was during the 1930 International Conference for the Study of Scientific Methods for the Examination and Preservation of Works of Art, that the modern approach to inpainting was established. Helmut Ruhemann (1891–1973), a German restorer and conservator, led the discussions on the use of inpainting in conservation. Helmut Ruhemann was a leading figure in modernizing restoration and conservation. His greatest contribution to the field of conservation "was his insistence on following the methods of the original painter exactly, and on understanding the painter's artistic intention". After his career of over 40 years as a conservator, Ruhemann published his treatise The Cleaning of Paintings: Problems & Potentialities in 1968. In describing his method, Ruhemann states that "The surface [of the fill] should be slightly lower than that of the surrounding paint to allow for the thickness of the inpainting...Inpainting medium should look and behave like the original medium, but must not darken with age." Cesare Brandi (1906–1988) developed the teoria del restauro, the inpainting approach combining aesthetics and psychology. However, this approach was used primarily by Italian restorers and conservators, with the terminology becoming widespread in the 1990s. Technological advancements led to new applications of inpainting. Widespread use of digital techniques range from entirely automatic computerized inpainting to tools used to simulate the process manually. Since the mid-1990s, the process of inpainting has evolved to include digital media. More commonly known as image or video interpolation, a form of estimation, digital inpainting includes the use of computer software that relies on sophisticated algorithms to replace lost or corrupted parts of the image data. == Ethics == In order to preserve the integrity of an original artwork, any inpainting technique or treatment applied to physical or digital work should be reversible or distinguishable from the original content of the artwork. Prior to any treatments, conservators proceed according to the American Institute of Conservation of Historical and Artistic Works. There are several ethic considerations before Inpainting can be justified. Various deliberation decisions over the ethical appropriateness of the amount and type of inpainting done, resides on many factors. As most conservation treatments, inpainting's ethical questions rest mainly with authenticity, reversibility and documentation.Any intervention to compensate for loss should be documented in treatment records and reports and should be detectable by common examination methods. Such compensation should be reversible and should not falsely modify the known aesthetic, conceptual, and physical characteristics of the cultural property, especially by removing or obscuring original material.New technologies and the aesthetic demand for perfect images without imperfections challenge conservators' ethical practices to protect the integrity of originals. == Methods == Inpainting methods and techniques depend on the desired goal and type of image being treated. Treatments to fill in the gaps are different between physical and digital art. In inpainting, detailed records of the initial state of the images can help with the treatment and replicate the original closer. === Physical inpainting === Inpainting is rooted in the conservation and restoration of paintings. Inpainting can aim to make a visual improvement to the artwork as a whole by repairing missing or damaged parts using methods and materials equivalent to the original artist's work. ==== Application techniques ==== By studying the painting methods of various artists and the composition of paints used historically, conservators are able to restore works very closely to their original visual appearance. The picture as a whole determines how to fill in the gap. Helmut Ruhemann's inpainting techniques by Jessell have procedures to "preserve" the quality of oil and tempera paintings. === Digital inpainting === Many programs are able to reconstruct missing or damaged areas of digital photographs and videos. Most widely known for use with digital images is Adobe Photoshop. Given the various abilities of the digital camera and the digitization of old photos, inpainting has become an automatic process that can be performed on digital images. The inpainting techniques can be applied to object removal, text removal, and other automatic modifications of images and videos. In video special effects, inpainting is usually performed after video matting. They can also be observed in applications like image compression and super-resolution. In photography and cinema, it is used for film restoration to reverse, repair, or mitigate deterioration (e.g., physical damage such as cracks in photographs, scratches and dust spots in film, or chemical damage resulting in image loss; performed infrared cleaning). It can also be used for removing red-eye, the stamped date from photographs, and objects for creative effect. This technique can be used to replace any lost blocks in the coding and transmission of images, for example, in a streaming video. It can also be used to remove logos or watermarks in videos. Deep learning neural network-based inpainting can be used for decensoring images. Deep image prior-based techniques can be used for digital image inpainting, where a trained deep learning model is either unavailable or infeasible. Deep models for visual content generation, like text-to-image or text-to-video, learn complex priors over the distribution of visual content, and can be used to inpaint missing parts. For example, videos can be separated into layers, using a technique called omnimatte, which either pretrain an omnimatte model or without any training using an omnimatte-zero model. Three main groups of 2D image-inpainting algorithms can be found in the literature. The first one to be noted is structural (or geometric) inpainting, the second one is texture inpainting, the last one is a combination of these two techniques. They use the information of the known or non-destroyed image areas in order to fill the gap, similar to how physical images are restored. ==== Structural ==== Structural or geometric inpainting is used for smooth images that have strong, defined borders. There are many different approaches to geometric inpainting, but they all come from the idea that geometry can be recovered from similar areas or domains. Bertalmio proposed a method of structural inpainting that mimics how conservators address painting restoration. Bertalmio proposed that by progressively transferring similar information from the borders of an inpainting domain inwards, the gap can be filled. ==== Textural ==== While structural/geometric inpainting works to repair smooth images, textural inpainting works best with images that are heavily textured. Texture has a repetitive pattern which means that a missing portion cannot be restored by continuing the level lines into the gap; level lines provide a complete, stable representation of an image. To repair texture in an image, one can combine frequency and spatial domain information to fill in a selected area with a desired texture. This method, while the most simple and very effective, works well when selecting a texture to be in-painted. For a texture that covers a wider area or a larger frame one would have to go through the image segmenting the areas to be in-painted and selecting the corresponding textures from throughout the image; there are programs that can help find the corresponding areas that work in a similar way as 'find and replace' works in a word processor. ==== Combined structural and textural ==== Combined structural and textural inpainting approaches simultaneously try to perform texture- and structure-filling in regions of missing image information. Most parts of an image consist of texture and structure and the boundaries between image regions contain a large amount of structural information. This is the result when blending differ
IT operations analytics
In the fields of information technology (IT) and systems management, IT operations analytics (ITOA) is an approach or method to retrieve, analyze, and report data for IT operations. ITOA may apply big data analytics to large datasets to produce business insights. In 2014, Gartner predicted its use might increase revenue or reduce costs. By 2017, it predicted that 15% of enterprises will use IT operations analytics technologies. == Definition == IT operations analytics (ITOA) (also known as advanced operational analytics, or IT data analytics) technologies are primarily used to discover complex patterns in high volumes of often "noisy" IT system availability and performance data. Forrester Research defined IT analytics as "The use of mathematical algorithms and other innovations to extract meaningful information from the sea of raw data collected by management and monitoring technologies." Note, ITOA is different than AIOps, which focuses on applying artificial intelligence and machine learning to the applications of ITOA. == History == Operations research as a discipline emerged from the Second World War to improve military efficiency and decision-making on the battlefield. However, only with the emergence of machine learning tech in the early 2000s could an artificially intelligent operational analytics platform actually begin to engage in the high-level pattern recognition that could adequately serve business needs. A critical catalyst towards ITOA development was the rise of Google, which pioneered a predictive analytics model that represented the first attempt to read into patterns of human behavior on the Internet. IT specialists then applied predictive analytics to the IT Industry, coming forward with platforms that can sift through data to generate insights without the need for human intervention. Due to the mainstream embrace of cloud computing and the increasing desire for businesses to adopt more big data practices, the ITOA industry has grown significantly since 2010. A 2016 ExtraHop survey of large and mid-size corporations indicates that 65 percent of the businesses surveyed will seek to integrate their data silos either this year or the next. The current goals of ITOA platforms are to improve the accuracy of their APM services, facilitate better integration with the data, and to enhance their predictive analytics capabilities. == Applications == ITOA systems tend to be used by IT operations teams, and Gartner describes seven applications of ITOA systems: Root cause analysis: The models, structures and pattern descriptions of IT infrastructure or application stack being monitored can help users pinpoint fine-grained and previously unknown root causes of overall system behavior pathologies. Proactive control of service performance and availability: Predicts future system states and the impact of those states on performance. Problem assignment: Determines how problems may be resolved or, at least, direct the results of inferences to the most appropriate individuals, or communities in the enterprise for problem resolution. Service impact analysis: When multiple root causes are known, the analytics system's output is used to determine and rank the relative impact, so that resources can be devoted to correcting the fault in the most timely and cost-effective way possible. Complement best-of-breed technology: The models, structures and pattern descriptions of IT infrastructure or application stack being monitored are used to correct or extend the outputs of other discovery-oriented tools to improve the fidelity of information used in operational tasks (e.g., service dependency maps, application runtime architecture topologies, network topologies). Real time application behavior learning: Learns & correlates the behavior of Application based on user pattern and underlying Infrastructure on various application patterns, create metrics of such correlated patterns and store it for further analysis. Dynamically baselines threshold: Learns behavior of Infrastructure on various application user patterns and determines the Optimal behavior of the Infra and technological components, bench marks and baselines the low and high water mark for the specific environments and dynamically changes the bench mark baselines with the changing infra and user patterns without any manual intervention. == Types == In their Data Growth Demands a Single, Architected IT Operations Analytics Platform, Gartner Research describes five types of analytics technologies: Log analysis Unstructured text indexing, search and inference (UTISI) Topological analysis (TA) Multidimensional database search and analysis (MDSA) Complex operations event processing (COEP) Statistical pattern discovery and recognition (SPDR) == Tools and ITOA platforms == A number of vendors operate in the ITOA space: